![]() Names such as /dev/sda1, /dev/sda2 instead of C: or D. Linux uses names that are different from windows for the disks, so you will see The first thing to do is to detect the partition where your data are located. You can also run commands from a terminal in the graphicalĮnvironment if you prefer. All the following steps will be based on commands so you may stay When the boot process is finished, you should get a black screen on which to ![]() (/manual/Booting_SystemRescue/) to get more details about that. Static IP, you can type the following: rescue64 dodhcpĭon’t worry about the network settings now, you can change them later if itįails. The gateway address is required only if you want to connect to a computer that Of course, you will have to replace this address with To do that, just type the following line at the Network, it is recommended to boot with your network settings so that you don’t You can then just pressĮnter to boot SystemRescue with the default settings. SystemRescue ASCII art logo, and boot instructions. Now, reboot with the cdrom / usb stick inserted. Order is defined, and make sure the cdrom or the USB device is the firstĭevice in the list (or before the hard drive). Then, go into the BIOS of your computer (you often have to press F2 or DELĭuring the hardware initialisation period), go into the section where the boot ![]() Windows is broken cannot boot from a cdrom disc, you can also Step-1: prepare the bootable cdrom or usb-keyĪll you have to do is to download the latest ISO image of SystemRescue for x86,īurn it onto a cdrom disc using any burning software. If you have network access (Ethernet card and another computer to which theĭata can be copied) this section explains how to configure the network and
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |